Dual HDMI and VGA Input Expansion Card
The IN607 from Presentation Switchers is a High Speed Dual HDMI and VGA Input, Card Input for the PS600 Series Modular Enclosure Presentation Switchers. This board is used to connect audio-visual source devices using the HDMI and VGA connector standards. By default, the output from this card, and selectable by the enclosure, is the most recently active signal. For example, if a user connects to the HDMI input with a laptop and the laptop begins to generate an output signal it is that output which will be available to the enclosure for display. If a user later connects a device to the VGA connector and generates a signal, the IN607 board will immediately switch to that signal and make that image available for the enclosure to route to the appropriately selected display.
Installation to PSxx Enclosures
Installation of the IN607 is quick and painless. The IN607 is a hot swappable card. To install the card, simply remove the single mounting screw that holds the IN600 Future Expansion Plate or other card where you plan to install the IN607. After removing the old plate, insert the new IN607 assembly. With proper alignment less than 1 foot pound of pressure is required to insert the card. Replace the screw to ensure the card is securely mounted in the chassis. Once installed, the system automatically recognizes the new board. No further activity is required. However, in some cases, it may be necessary to adjust the audio input trim to a nominal input level. See the Installation Manual for more details regarding audio input adjustments.